T & M Instruments:

  • Digital Multi Meter
  • True RMS DMM
  • Ex-Proof DMM
  • Digital Clamp Meter
  • Tachometer
  • Sound Level Meter
  • Light Meter
  • Lux Meter

 

Request for Quote

Other Automation Products

DMM

DIGITAL MULTI METER 

Model: EQ-DM821D

Features :

  • Low Power Consumption
  • Auto Manual Measure Range
  • Auto Power Off Function

 Specification :

  • DC V Range : 400mV/4V/40V/400/1000, Accuracy : ±(0.8%+3)
  • AC V Range :  4V/40V/400V/750V,  Accuracy : ±(1.0%+5)
  • DCA Range : 200µ/4000µ/40m/400m/4/10A, Accuracy : ±(1.0%+2)
  • ACA : 400µ4000µ/40m/400m/4/10A, Accuracy : ±(2.0%+5)
  • Ohm : 400/4K/40K/400K/4M/40M Ohm, Accuracy : ±(1.0%+2)
  • Frequency : 5/50/500/50K/500K/5MHz, Accuracy : ±(0.1%+3)
  • Max. displaying : 3999 (3.75 digit)
  • Power Supply : 9V battery
  • Environment  Working Temp.: 0~40°C, Humidity <80%,   Storage Temp.: -10~50°C, Humidity <85%
 True RMS DMM

TRUE RMS AUTORANGING DIGITAL MULTIMETER

Model: C-120

Features :

  • LED back light system for operation under poor illumination.
  • Shock absorbing holster add an extra protection and provide a built-in tilt stand.
  • 1ms PEAK (Max/Min) Function)

Specification :
Function   Range                   Resolution         Accuracy
DCV         400mV ~ 1000V   0.1mV ~ 1V        ±0.3%rdg + 2dgts
ACV         400mV ~ 750V      0.1mV ~ 1V        ±0.5%rdg + 5dgts
DCA         400uA ~ 20A         0.1uA ~ 0.01A    ±0.8%rdg + 2dgts
ACA         400uA ~ 20A          0.1uA ~ 0.01A    ±1%rdg + 5dgts

 TRUE RMS DMM  

DIGITAL TRUE RMS MULTI METER - 5000 COUNT

Model: MX 24B

MX 24B became the reference among 5,000-count TRMS digital multimeters.
It has an ADP input and can be connected to a wide range of accessory probes: luxmeter, ammeter clamp, thermometer, etc.

Features:

  • 5,000 counts
  • Backlit display, 34-segment bargraph
  • 500kΩ low-impedance measurement input 
  • Voltage up to 1,000VDC and 750VAC impedance 10MΩ 
  • Direct intensity up to 10A DC and 6A AC 
  • Resistance up to 50MΩ 
  • Audible continuity test, diode test 
  • Capacitance meter function up to 50mF 
  • Frequency meter function up to 500kHz 
  • MEM/AUTOMEM key
  • Dimensions 170 x 80 x 35mm, weight 300g.
  • Warranty: 3 years 
  • Safety: IEC 61010-1 600V Category III

 

 

 

 Ex-Proof DMM  

100%-EX PROOF TRUE RMS DMM 50,000 COUNTS

Measurements in total safety in difficult and explosive environments

This ATEX-certified product is designed for use in hazardous or explosive environments involving gas or dust, in accordance with the EN 50014, 50020 and 50281-1-1 standards. 


It complies with the following specifications:

  • ATEX 94/9/CE directive
  • EN/IEC 60079-0 – EN/IEC 60079-11
  • EN/IEC 61241-11 – EN/IEC 61241-0
  • EN/IEC 61010-1 – 600 V CAT III

It is certified LCIE 02 ATEX 6005 X and, in terms of the "former regulations", EEx ib IIC T5/ EEx ib I according to:

  • Certification of CE inspection numbers
  • LCIE 02 ATEX 6005 X and supplementary clauses
  • LCIE 02 ATEX 6005X / 01, 02, 03, 04


It is equipped with a 500mA fuse and the patented SECURIX system to prevent untimely disconnection of the leads. It is supplied in a bag with some of its accessories.

  • Bargraph; zoom or central zero
  • VDC from 0.5 to 60 V
  • AC and AC+DC voltage from 0.5 to 60 V
  • Bandwidth: DC to 50 kHz
  • AC and AC+DC current from 500 µA to 500 mA
  • Resistance from 500 Ω to 50 MΩ
  • MIN, MAX and Average
  • Frequency, capacitance, temperature, dB, resistive power, duty cycle, pulse width/chronometer, event counter
  • Continuity test, diode test

RS232 optical interface available as an option for transferring the measurements onto a PC or printer.

 Digital Clamp Meter

DIGITAL CLAMP METER

Model: EQ-DC801


Features :
• Auto Power off
• Diode / Continuity Test

Specification :

Range

Resolution

Accuracy

0 to 600ACA

0.001A to 1ACA

± 3% + 12dgt

0 to 600V DC

0.1 to 1VDC

± 1.8% + 1dgt

0 to 600V AC

0.1 to 1 V AC

± 1.2% + 5dgt

0 to 20M Ohms

100M to 10K Ohms

± 1.0% + 2dgt

 
 Digital Clamp Meter

DIGITAL CLAMP METER 

Model: EQDC802


Features :

  • Auto Power off
  • Diode / Continuity Test

General Specification :

  • Display : LCD , 1999 counts
  • Polarity Indication : "–" displayed for negative polarity
  • Overrange Indication : Only figure "OL" on the display
  • Jaw opening Capability : 42mm (Max conductor size)
  • Power Supply : 9V Battery
  • Operating Environment : 0 to 40°C
  • Storage Temperature : –10°C to 50°C

 

Range

Resolution

Accuracy

DC V

1000V

1V

±(1%+2)

AC V

750V

1V

±(1%+5)

Frequency

20kHz

1Hz

 Tacho meter  
DIGITAL CONTACT & NON CONTACT TACHOMETER

Model: DT-209X
 
Features :
  • High-precision laser measures from distances up to 14 feet
  •  Includes NIST calibration Certificate
  •  Includes USB cable and software
  •  Includes 6" circumference surface speed wheel
 Specification :
 
Display : LCD 5 digit 12mm high LCD
 
Measuring Range : Non-contact : 6 to 99,999 rpm
                          Contact : 0.8 to 25,000 rpm
 
Accuracy : 6 to 8,299 rpm; 1 rpm;
               8,300 to 24,999 rpm; 2 rpm
               25,000 to 99,999 rpm; 0.006% rpm
 
Measuring Distance : 14 feet (5.2 m) maximum
 
Memory : 13 readings are stored im Memory & retained for 5 minutes
              (last, max., min., & 10 measurements)
 
Batteries : 2 1.5V AA
 
Operating Temp.: 0C to 45C
 
Accessories Included : Reflective tape, cone adapter, surface speed
                               wheel 200L contact adapter & carrying case
Sound Level Meter

Mini Sound Level Meter

Model: EQ-805

Features :

  • Extremely Cost Effective
  • Max Hold and Data Hold Function
  • High Performance
  • Compact & New Design


Specification :

  • Range : 35 to 130dB
  • Resolution : 0.1dB
  • Accuracy : ± 1.5dB
  • Operating Frequency : 31.5Hz to 8KHz
 DataLogging Sound Meter Datalogging Sound Meter 

Model: C-322


Features :

  • RS232 Interface
  • 32,000 Records Datalogger
  • Bargraph Indication
  • MAX / MIN Function

Specification :

  • Level Range : Lo=30~80dB; Med=50 ~ 100dB; Hi=80~130dB
  • Accuracy : ± 1.5dB (ref 94dB@ 1KHz)
  • Dynamic Range : 50dB
  • Frequency Range : 31.5Hz to 8KHz
  • Auxiliary Outputs : AC / DC Output
 Sophisticated Sound Meter

Sophisticated Sound Meter

Model: HD-2010

 

Features :
  • Evaluation of noise emissions from machines or equipments.
  • Insulation efficiency evaluation.
  • Noise monitoring, even by remote control via PC.

Specification :
  • Outputs : AC, DC
  • Internal Data Storage : 2 MB + 2 MB (Opt)
  • Power supply : Batt. 4 x AA and DC 9V / 200 mA
  • Measuring dynamics : 20~140dB in 5 range of 80dB (opt), 2 ranges of 110dB
  • Measuring Parameters : Lp, Lmax, Lmin, Leq, SEL, DoseP, Dose,LN
  • Frequency weighting : Simultaneous, RMS A, C, Z (LIN) , peak C, Z
  • Temporal weighting : Simultaneous, FAST, SLOW & IMPULSE
 Integerated Sound Level Meter

Integrating Sound Level Meter (RS-232)

Model: EQ-1353

 

Features :
  • Wide linearity range of 100dB
  • 32000 Records Data logging function
  • RS-232 interface
  • Real time clock with calendar

Specification :
  • Range : 31.5 Hz to 8KHz
  • Accuracy : ±1.5dB (ref 94dB @1KHz)
  • Measurement Level : 30dB to 130dB
  • Measurement Frequency range : 31.5 Hz to 8KHz
  • Frequency Weight : A and C
  • Analong AC / DC output : 2Vrms ( at full scale ) , 10mVDC / dB
                  Digital Sonometer Digital Sonometer

Item Code: CA832

 

In a compact case protected by a shockproof cover, the C.A 832 digital sonometer by Physics Line checks sound levels from 35 to 130 dB in conformity with standard IEC 651 type 2.

  • 3 measurement ranges
  • precision: ±1.5dB
  • resolution: 0.1dB
  • 2 slow and fast integration times
  • 2 weighting curves dB(A) and dB(C)
  • memorisation of maximum value
  • analog output: 10mV/dB and 1V RMS - 600W
  • possibility of tripod mounting
  • 2000 count display
  • dimensions : 237 x 60.5 x 38 mm – weight: 230g
  • shockproof protection cover
                     Digital Sound Level Meter

Digital Sound Level Meter

Model: Centre325

Features:

  • Mini Size
  • Newly Design Shape
  • Low Cost High Performance
  • MAX/MIN Function
  • Level Range Display
  • AC Singal Output
  • Resolution 0.1 dB
  • IEC 651 Type II
  • Microphone: Electric condenser microphone
  • Accuracy: ±1.5 dB ( ref 94dB @1KHz )
  • Level Range: 
    Low = 35 ~ 80 dB
    Medium = 50 ~ 100 dB
    High = 80 ~ 130 dB
  • Frequency Weighting: A , C
  • Time Weighting: Fast , Slow
  • Auxiliary Outputs: AC Signal Output
  • Dynamic Range: 50 dB
  • Frequency Range: 31.5Hz to 8KHz
  • Battery Type: 9V Battery NEDA 1604, IEC 6F22, JIS 006P
  • Battery Life: 50 hours ( with alkaline battery )
  • Operation Temp.: 0°C~ 40°C(<80% R.H.)
  • Storage Temp.: -10°C~ 60°C( <70% R.H.)
  • Dimension: 232mm×54mm×34mm ( 9.1” ×2.1” ×1.3” )
  • Weight: Approx. 200g
  • Accessories: Manual, 9V Battery, Calibration Screwdriver, Windscreen
    Light Meter

Low Cost Reliable Reading Light Weight

 

Features :

  • 3½ digital LCD display
  • Auto Power Off
  • Low battery indication
  • User selectable Fc/Lux

Specifications

  • Display : LCD 1999 Count
  • Range : 0 to 50,000 lux
  • Accuracy : ±5% + 10d (< 10,000 lux)
  • Repeatability : ± 2%
  • Storage Temp. : -10 to 60 ºC at < 80% RH
 Digital Light Meter

 

Digital Light Meter

Model: EQ-LM802

 

 

Features 

  • High accuracy and rapid response
  • Data-Hold function
  • Unit and sign display for easy reading
  • Automatic zeroing
Specifications :

  • Display : 3½ digit LCD.
  • Measuring Range : 200, 2,000, 20,000 and 200,000 Lux
  •                              20, 200, 2,000, 20,000 FC
  • Over Range Display : Highest digit of “1” is displayed.
  • Accuracy : ± 3%rdg ± 0.5%f.s
  • Repeatability : ± 2%
  • Temp. Characteristic : ± 0.1%/ºC.
  • Operating Conditions : Temperature : 0ºC to 40ºC, Humidity : 0 to 80% RH.
    Light Intensity Meter

 

Light Intensity Meter

Model: HD23020

 

 

Specifications :

  • Measuring unit : lux-fcd-mmol/m².s-cd/m²-W/m² -mW/cm²
  • Operating temp. :-5...50 ºC
  • Warehouse temp. :-25...65 ºC
  • Working relative humidity : 0...90%RH without condensation
  • Batteries : 3×1.5V type AA batteries
    High Intensity Lux Meter

High Intensity Lux Meter

Model: EQ-1308


Features :

  • Analog bargraph / segments
  • Peak Hold
  • Relative Mode
  • Max and Data Hold

Specification :
  • Max. Range : 4,00,000 Lux
  • Accuracy : ± 5% ± 10d (<10,000 Lux), ± 10% ± 10d (> 10,000 Lux)
  • Max Resolution : 0.1 lux / Fc